Key Features

Operator Safety

  • A neutral safety start prevents the engine from starting unless shifted into neutral.
  • A seat safety switch automatically shuts down the PTO shaft and any hydraulically powered attachment if the operator leaves the driver’s seat.
  • If the operator leaves the seat without placing the shifter into neutral, the engine will shut down.
  • Tractor has hydraulic brakes at each wheel. There is also a mechanical parking brake that can be applied if hydraulic brakes fail.
  • Cab is ROPS certified and there is a certification tag attached to the inside of the cab.
  • A wire protection guard encloses the engine fan.
  • The tractor has reflective striping on both sides of cab and rear side hoods, as well as on the rear hood below the tail lights.
  • Tractor has a backup alarm activated by the forward / neutral / reverse lever.
  • The tractor has Safety, Danger, Caution and Pinch Point decals.
  • External lift cylinder switch controls the lift cylinders hydraulic flow which eliminates the need for a second person to operate the controls.
  • Orange seatbelt so supervisors at a quick glance can see if the operator is wearing it.
  • Seat belt interlock incorporates a safety interlock system which only allows the tractor to move when the seat belt is fastened.

Options & Accessories

The cornerstone of the Trackless MT is its year-round versatility; but it doesn't stop there. The Trackless MT can also be equipped with a wide array of options and accessories that can further enhance its functionality and operator experience. We have received many customer specific requests throughout the years and have spent the research and development time creating popular add-ons that not only complement the tractor, but are designed to meet our high standards.

Contact your local dealer to discuss how the Trackless MT can be customized to fit into your maintenance program.

  • Drivetrain
  • Hydraulics
  • Engine Compartment
  • Cab Exterior
  • Cab Interior
  • Lighting
  • Tires & Wheels
  • Safety & Security
  • Miscellaneous

Deep Reduction Transfer Case

10:1 deep reduction planetary transmission when coupled to the mechanical transmission. 4 speed ranges instead of 2. Deep low is 0 – 10 feet/minute. Required for the cold planer.

Rear PTO / 3-Point Hitch

Adding a mechanically driven 540 RPM PTO and 3-Point Hitch to the rear of the Trackless MT will allow you to utilize any Category 1 3-point hitch implements that you already own.

Electric Locking Differentials

Need more traction? Lock or unlock the differentials as required with the flip the switch. Capture 100% of the available torque and send it equally to both ends of the axle.

Hydraulic Pump & Valve Kit

A secondary high-volume hydraulic circuit is required for attachments such as our larger Sweepers, Wing Mowers and Leaf Loader or when using some attachments simultaneously.

Reversible Motor Spool

Temporarily reverse the direction of hydraulic flow to the attachment at the push of a button. This is required with our Leaf Loader.

Low Hydraulic Shutdown Alarm

Sensors monitor the hydraulic oil levels. If it becomes critically low, the Trackless MT will display a warning light and emit an audible alarm. 30 seconds later the machine will shut down.

High Range Travel Lockout

We highly recommend that the Trackless MT be in low range when operating any attachment. This option enforces that and prevents the operator from working in high range.

Dump Body

The Dump Body allows you to carry an additional load of spreader material on your Trackless MT. Hydraulically raising the dump body will replenish your rear spreader prolonging the need for a refill.

Reversing Engine Fan

Remove grass clippings and other debris to prevent overheating. At timed intervals, the fan blades will reverse direction at full RPM purging the radiator of any accumulated build-up.

Battery Disconnect Switch

A simple mechanical switch installed in the engine compartment will discourage theft or unauthorized use and prevent low-level battery drain when storing the Trackless MT for longer periods of time.

Remote Battery Terminals

External battery terminals located on the rear hood for ease of boosting machine if needed.

Locking Hoods

Keep unauthorized people from getting into things they should not. Give only the people you want access to important parts of the tractor.

Locking Top Hood Only

Keep unauthorized people from opening up the hood.

7-Pin Trailer Plug

A 7-pin connector installed on the rear of the Trackless MT provides convenience and safety when towing trailered equipment. A mating connector is shipped with this option.

License Plate Bracket & Light

Provincial, municipal or state laws may require that off-road vehicles be registered and plated when driving on, along or across highways. Stay in compliance with this bracket and light kit.

Intermittent Front Wiper

Much like an automobile, installing a variable speed intermittent wiper control on the front windshield wiper allows the operator to choose from variable, low and high speed settings.

Rear Wiper & Washer Kit

Increase rear visibility by installing an independently controlled wiper and washer kit on the rear window of the Trackless MT. A second washer fluid tank is included.

Intermittent Rear Wiper

As with the front wiper, you can add the same variable speed intermittent wiper control to the rear wiper and washer kit option.

Rear Slider Window

Let in more air into the cab to get the comfort you want.

AC with Auxiliary Heat & Pressurization

A roof-mounted air conditioner not only keeps the operator cool in the summer months but also adds more heat for the winter. Also includes a cab pressurizer to keep excess dust, etc. from entering the cab's interior.

F-N-R Joystick

Shift Forward-Neutral-Reverse without lifting your hand from the joystick. With the main F-N-R shifter in neutral, the joystick switch is turned on and becomes the primary directional controller.

Backup Camera Kit

With a weather resistant camera installed on the rear of the Trackless MT and a small LCD monitor in the cab, the operator has a clear rear view and can back up confidently and safely.

Extra Set of Keys

Every Trackless MT ships with 2 DOOR keys and 2 IGNITION keys. Order an additional set of replacement keys for safe keeping or to distribute across multiple operators.

Guards on All Lights

Protect the all your lights from flying debris or anything else that may damage them. A great option when using the boom fail.

High Mount Tail Light Kit

Standard with the dump body, this tail light kit can be added for any attachment.

Loader Lug

Off-The-Road (OTR) 10-ply skid steer tires have increased puncture and abrasion resistance coupled with deeper tread depth for optimum service life.

Dual Loader Lug

Double up on our loader lug tires when additional stability and traction are required or when extra weight needs to be distributed over the ground such as when using our Boom Flail Mower.

Winter Radial

So popular, we've made it standard equipment. Large staggered tread blocks deliver maximum traction under the most treacherous conditions while providing good on-road manners.

Summer Turf

These tires have a broad-shouldered design and provide excellent traction on turf and grass with minimal turf damage.

Goodyear® Xtra Trac

If your Trackless MT will be used for side slope mowing, we suggest that you increase it's stability by extending the axles and mounting a set of Goodyear® Xtra Trac turf tires.

Calcium Filled Tires

Ballast the tires with calcium chloride to greatly increase the weight and traction of the Trackless MT delivering more HP to the ground.  CaCl can be added with or without tubes.

Slow Moving Vehicle Sign

Local traffic laws may require the Trackless MT to display a slow moving vehicle sign when used roadside. Have it factory installed and save the trouble of drilling and mounting it yourself.

Articulation Lock

Prevent inadvertent articulation of the Trackless MT during maintenance or transport by locking the pivot connection between the front and rear halves of the tractor.


Protect the operator & tractor from flying debris. A must have when using the boom fail.

MT6 Break-In Filter Kit

A break-in period of 50 hours is suggested for your new Trackless MT. Be prepared with a round of replacement filters to move you into a regular maintenance schedule.

Electric Brake System

Add an electronic brake controller in the Trackless MT if you plan on towing equipment that have electrically actuated brakes installed. Required when using our Tow Behind Sander.

Pintle Hitch

Make the Trackless MT tow ready with a rigid mount pintle hook. This combination pintle hook and 2-inch ball hitch provides the flexibility to meet most towing applications.

Extra Set of Manuals

Every new Trackless MT is shipped with an Operators Manual, Parts Book and Service Manual. Keep an extra set of manuals on hand as a backup or for your parts or service department.








  • Safety & Security
  • Mechanical
  • Exterior
  • Interior
  • Weights & Dimensions
Neutral safety start switch std  
Automatic hydraulic power shuts off if rotary mower wings raised std  
Automatic engine shut down if operator leaves seat with shifter not in neutral position std  
Recognition of generator / infrared automatically triggers additional safety interlock system to allow unmanned operation std  
Application of service brake foot pedal activates more aggressive hydrostatic braking in conjunction with the 4 wheel service brakes std  
Wire finger guard protection from engine fan blades std  
Reflective striping on both sides and rear of tractor std  
Pinch point, danger, caution decals std  
Backup alarm std  
Cummins Model
Tier 3 electronic
4.5L (274.5 cubic inch)
115 BHP @ 2,500 RPM
360 lb-ft @ 1,500 RPM
with charge air cooling
Equipped with cold start aid, block heater std  
Air breather warning lamp std  
Engine oil pan heater   opt
Front PTO 13/8" spline, 540 RPM std  
Twin Disc over center clutch with electric over hydraulic actuation std  
Reduction box 4:1 std  
Rear PTO 13/8" spline, 540 RPM   opt
Front Trackless quick hitch with dual lift cylinders std  
Rear Category 1, 3-point hitch with anti sway bar   opt
Sauer Danfoss hydrostatic / electronic transmission and motor std  
Control by electronic foot pedal programmed to control hydrostatic independently or both engine RPM and hydrostatic simultaneously std  
Trackless mechanical transmission with high / low range and neutral std  
Dana Model 60 full float axles with new heavy duty alloy spindles std  
Limited slip differentials with 7,000 lb capacity std  
High range lockout to prevent operation of attachments in high range   opt
10:1 deep reduction planetary transmission. When coupled to mechanical transmission, 4 speed ranges instead of 2. Deep low is 0 to 3m (10ft) / min   opt
Electric locking differentials front and rear with independent switches
When not engaged, differentials revert back to limited slip
Lockers will not engage in high range
Axle extensions for side slope mowing   opt
20 g.p.m. hydraulic gear pump driven by timing gears of engine std  
Joystick control with 8 backlit membrane switches, 3 float position switches also have additional LED indicator lights
Switches are colour coded to hydraulic circuits
6 (3-pair) low volume front hydraulic couplers for attachment control std  
2 (1-pair) high volume hydraulic couplers to power attachments requiring approximately 14 g.p.m. std  
2 (1-pair) additional ports in front of cab for addition of optional second high flow circuit std  
2 (1-pair) high volume hydraulic couplers at rear of tractor std  
2 (1-pair) high volume hydraulic couplers in front of cab
Cartridge type hydraulic filter mounted at highest point in system to allow dry changes std  
Thermostatically controlled bypass from oil cooler for winter start up std  
Steel hydraulic lines std  
14 g.p.m. hydraulic gear pump, only driven when PTO clutch engaged   opt
Low hydraulic oil warning   opt
Hydraulic oil tank heater   opt
Hydrostatic dynamic braking programmed for smooth deceleration std  
Hydraulic service brakes on all 4 wheels std  
Service brake application also activates more aggressive hydrostatic braking std  
Mechanical parking brake with warning buzzer std  
Articulated steering 35º each way std  
Hydraulic orbitrol motor, hydraulic steering cylinder, tilt steering column std  
Inside turning radius of approximately 8-feet std  
Steering column includes hazard button, signal lever, center mounted horn std  
High strength spherical bearings for pivot pins and steering pins std  
Bearings and pins greaseable std  
104 litres, 27 US gallons std  
Low range 0 to 12 km (8 mph) std  
High range 0 to 30 km (19 mph) std  
Deep low range 0 to 3m (10ft) / min   opt
All steel hoods; 4 hinged access doors, hinged rear grill std  
Heavy duty 10 gauge steel fenders std  
4 heavy duty tie down D rings std  
Grease / lubrication chart decal under hood std  
Dump body with hydraulic lift and automatic tailgate   opt
Locking hoods   opt
Locking fuel cap   opt
Pintle hitch   opt
25/16" ball hitch   opt
Rear license plate bracket and light   opt
SMV - slow moving vehicle sign   opt
4 - Halogen headlights
1 - Halogen backup light std  
2 - Rubber mounted shockproof tail lights std  
1 - Interior dome light std  
Front and rear signal lights and 4-way flashers std  
1 - Blue or amber strobe mounted on adjustable pedestal with quick disconnect twist lock wiring plug std  
Second strobe light   opt
Strobe per customer specifications   opt
Second rear work light   opt
Additional high mount rear tail lights   opt
LED tail lights and signal lights   opt
Headlight, signal / marker light guards   opt
LT 245/75R x 16 10-ply radial winter tire on HD 16" 8-bolt rims std  
31 x 10.00 x 16.5 10-ply loader lug tires on HD 16.5" 8-bolt rims   opt
31 x 13.50 x 15 4-ply turf tires on HD 15" 8-bolt rims   opt
Dual loader lug tires (8) on 8 rims   opt
Calcium fill   opt
Calcium fill in tubes   opt
All steel components including cab prepped in 5-stage phosphate wash. 2-part epoxy primer with rust inhibitor, 2-part poly urethane automotive top coat oven baked std  
Latches, linkages, levers, batter hold down straps & bolts, support rods, striker plate, shifter gate and various small brackets zinc plated std  
Colour highway yellow with black trim, grey / black interior std  
Custom colour to customer specification   opt
Certified R.O.P.S. cab structure std  
Steel roof with rain gutters std  
Full gauges; tachometer, speedometer, fuel level, engine coolant temp., hydaulic oil temp., engine oil pressure, voltmeter, hour meter std  
3-speed heater defroster std  
2 outside and 1 inside rear view mirror std  
3-point retractable seat belt std  
AM / FM / stereo, dual speakers, external aerial with amplifier std  
Cup holder, cell phone holder, door pocket, storage tray std  
12 volt power point auxilliary outlet for cell phone std  
12 volt 2-way radio jacks std  
Gas strut door cylinder ad safety strap std  
Tilt steering column with horn, signal lever, hazard button std  
3-speed pantograph wiper and windshield washer std  
Conaflex sound deadening, sound barrier floor matting std  
Operator's Manual std  
High back, fabric covered air ride seat with lumbar support std  
Adjustable left arm rest, right adjustable free swing joystick arm rest std  
Air conditioning with auxilliary heat and pressurization   opt
Fire extinguisher   opt
Log book case   opt
Rear slider window   opt
Intermittent front wiper   opt
Rear wiper and washer   opt
2-way radio to customer specified frequency   opt
Backup camera   opt
Atrol 2 tachograph   opt
Slopemeter   opt
Overall length including rear bumper 146.5"
Height to top of cab
(add 8¾" for air conditioning)
Track width with standard loader lug tires 49.5"
Overall width including fenders 50.5"
Weight with oils, coolant and full tank of fuel 6,240 lbs
(2,830 kg)