GO

  • Photos

  • Video

  • 3D Spin

  • Before & After
  • Overview
  • Technical

Almost every municipality has several areas which prove difficult, unsafe or even impossible to mow. Ditches, steep inclines, over guard rails, down embankments and waters edge are usually characterized as being overgrown and unsightly. The Boom Flail Mower is the ideal attachment to take on the tall grass and weeds, brush, hedges and small trees that occupy these spaces.

Our boom mower provides better visibility than side or rear mount boom flails resulting in less operator fatigue and safer operation. Hydrostatic control permits the operator to constantly vary the ground speed without shifting gears allowing him/her to concentrate and react more quickly when approaching an obstruction. The compact size of the MT and Boom Flail causes less interference with passing traffic than large agricultural type tractor/mower combinations and is an added benefit when travelling to and from the job site.

It can be removed from the Trackless MT in approximately 10 minutes. Within minutes another attachment can be installed and the operator can be on the way to another job site.

Specifications

Width of cut 43½" (1105mm); overall width of head 53½" (1359mm)
Horizontal reach 13½-feet from center of MT to outside cut
Below grade cut 53" (1346mm)
Vertical reach 13½' (4115mm)
Overall level ground cutting coverage 11-feet, starting 5" inside outer tire
Number of cutting blades 33
Model Length Width Height Weight
Boom Flail 66"
1676mm
206"
5232mm
210"
5334mm
2279lbs
1033kg

*Measurements are approximate.*

*For detailed tender specifications, contact Trackless Vehicles sales department.*


MT Prerequisites

You will need to have these options installed on the Trackless MT to be able to use this attachment.

  • Reversing Engine Fan (Standard MT7)
  • Tires: Dual Loader Lug - Front & Rear